Parker AC30V Series, Manual

Page: 264 / 337

Parameter Reference
D-67
AC30V series Variable Speed Drive
Ramp
Parameters::Motor Control::Ramp
This function forms part of the reference generation. It provides the facility to control the rate at which the Drive will respond to a changing
setpoint demand.
PNO Parameter Descriptions
0484
Seq Stop Method VHz
Selects stopping mode that the controller will use once the run command has been removed. The choices are:
Enumerated Value : Stopping Mode
0 : DISABLED VOLTAGE, (COAST)
1 : RAMP
2 : STOP RAMP
3 : DC INJECTION (only Volts/Hz control mode)
When VOLTAGE DISABLED ( COAST ) is selected the motor will free-wheel. When RAMP is selected the Drive will decelerate using
the reference ramp deceleration time, provided it is non-zero. When STOP RAMP is selected the motor will decelerate in
Stop Ramp
Time . When DC INJECTION is selected the motor is stopped by applying dc current.
1257
Seq Stop Method SVC
Selects stopping mode that the controller will use once the run command has been removed. The choices are:
Enumerated Value : Stopping Mode
0 : DISABLED VOLTAGE, (COAST)
1 : RAMP
2 : STOP RAMP
When VOLTAGE DISABLED ( COAST ) is selected the motor will free-wheel. When RUN RAMP is selected the Drive will decelerate
using the reference ramp deceleration time, provided it is non-zero. When STOP RAMP is selected the motor will decelerate in
Stop
Ramp Time .
0485
Ramp Type
Select the ramp type:
Enumerated Value : Ramp Type
0 : LINEAR
1 : S