Parker AC30V Series, Manual

Page: 234 / 337

Parameter Reference
D-37
AC30V series Variable Speed Drive
PNO Parameter Descriptions
8 Digital Output 11 GPIO option 0031
9 Digital Output 12 GPIO option 0032
10 Digital Output 13 GPIO option 0033
11 Digital Output 14 GPIO option 0034
12 Digital Output 15 GPIO option 0035
13 Digital Output 16 GPIO option 0036
14 Relay 11 GPIO option 0037
15 Relay 12 GPIO option 0038
0039
Anin 1 Value
Terminal X11.1
The value returned by the signal processing electronics. For unipolar ranges, (all except -10..10V), the value is expressed as a
percentage of the hardware range. For the -10..10V range the full range signal is expressed as -100% to +100%.
0040
Anin 1 Break
When the input range is set to 4..20mA a break is defined as an input signal less than 3mA. Otherwise this parameter is set to
FALSE.
0041
Anin 2 Value
Terminal X11.2
The value returned by the signal processing electronics. For the 0..10V range the value is expressed as a percentage of the
hardware range, (0 to 100%). For the -10..10V range the full range signal is expressed as -100% to +100%.
0042
Anout 1 Value
Terminal X11.3
The desired output value expressed as a percentage of the output range.
Range Mapping
0..10V 0% gives 0V, 100% gives 10V
0..20MA 0% gives 0mA, 100% gives 20mA
4..20MA 0% gives 4mA, 100% gives 20mA
0043
Anout 2 Value
Terminal X11.4
The desired output value expressed as a percentage of the output range.
Range Mapping
-10..10V -100% gives -10V, 100% gives 10V
0..10V 0% gives 0V, 100% gives 10V