Parker AC30V Series, Manual

Page: 243 / 337

D-46
Parameter Reference
AC30V series Variable Speed Drive
Motor Nameplate
Advanced Setup::Motor::Motor Nameplate
Parameters::Motor Control::Motor Nameplate
Only available if VHz control selected in
Control Mode.
In this function you enter the details of the motor under control and any available motor nameplate information.
Refer to Induction Motor Data parameters which are determined by the Auto Tune feature for example the Magnetising Current, Stator
Resistance, Leakage Inductance, Mutual Inductance and Rotor time Constant for model parameters.
Note
Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor motor control or Autotune problems
may occur if you do.
PNO Parameter Descriptions
0455
Rated Motor Current
Rated motor current on the name plate
0456
Base Voltage
The rated motor voltage on the name plate
0457
Base Frequency
The base motor frequency on the name plate
0458
Motor Poles
Motor poles on the nameplate
0459
Nameplate Speed
Rated motor speed on the name plate
0460
Motor Power
Motor power rating
0461
Power Factor
Motor power factor on the name plate