Parker AC30V Series, Manual

Page: 46 / 337

Installation
4-28
AC30V series Variable Speed Drive
OK key
Soft Key 1
Getting Started
GKP SETUP WIZARD
Purpose of the Setup Wizard
The purpose of the setup wizard is to configure the drive in a clear and concise manner.
First familiarize yourself with Chapter 7 Graphical Keypad, for the keypad functions.
Starting the Setup Wizard
The Setup Wizard is automatically invoked when the drive is reset to factory default settings. The setup
wizard may be invoked at any other time by changing the parameter “Run Setup?” to YES (you will find
this in the “Setup” menu).
Running the Setup Wizard
At each point in the wizard pressing the OK key selects the displayed value and moves on to the next step.
Pressing
Soft Key 1 moves back a step. Pressing the UP and DOWN keys modifies the selected value.
Setup Wizard Stages
The first option presented is “Set Factory Defaults”. Changing this parameter to TRUE then pressing OK resets all parameters back to the default
value determined by the AC30V’s hardware configuration. If this choice is left FALSE the setup wizard starts with all parameters with their
previously set values. Accepting each choice without change by pressing OK will result in no change to the drive’s configuration.
The next option is to select the Language that is to be used to present information on the GKP and the web page, (when enabled).
The rest of the Setup Wizard consists of a several sections. Each section corresponds to a functional component of the drive, for example:
•
Application selection
•
Motor Data
•
Analog input and output ranges.
•
Fieldbus options
•
On-board Ethernet
•
Auto tune
If not required, any section may be skipped.
The default setting for all parameters depends on earlier answers and on the physical configuration of the drive. All data entered is automatically
saved without the need for any additional commands.
Finalising Setup
Once the Setup Wizard has been run to completion the feature is automatically disabled. Re-starting the drive will not cause the Setup Wizard to
be run again. (If it is desired to re-run the Setup Wizard, this can be achieved as detailed above in “Starting the Setup Wizard”).
For complete details go to “Chapter 9 Setup Wizards”.