Parker AC30V Series, Manual

Page: 139 / 337

12-4
Ethernet
AC30V series Variable Speed Drive
Typical Wiring Configurations
Point to Point Connection
When connecting a PC directly to an AC30 drive either:
•
Both sides use local-link addresses 169.254.*.* (recommended) , or
•
Both sides are set with a fixed IP address (each must be different and on the same subnet)
When using local-link addresses the parameter
0930 Auto IP must be set to TRUE (see the section Automatically Assigning an IP Address using
Auto-IP ). Normally the PC is already configured to allow for an Automatic Private IP address. However if problems are encountered check the
PC’s network settings (see the section 12-10).
Note: It may take the PC up to 2 minutes to obtain an Automatic private IP address when the Ethernet cable is plugged in.