Parker AC30V Series, Manual

Page: 131 / 337

10-6
Trips & Fault Finding
AC30V series Variable Speed Drive
Runtime Alerts
A Runtime Alert is a fault that indicates a permanent hardware error. The Runtime Alert display is of the form
RUNTIME ALERT
CODE 00000000
CODE is a number in the range 0 to 65000. The following value is used to provide additional information to assist Parker Hannifin Technical
Support personnel.
CODE ERROR Possible Reason for Error
1 to
255
Internal exception
•
VCM not secured to power stack
• Option not secured correctly to VCM control card
• Earth bonding failure.
• Fault during firmware upgrade
1001
to
1003
Processor overload
• Select a lower switching frequency, (
Parameters::Motor Control::Pattern Generator::Stack Frequency)
•
Record the error message and contact Technical Support
1006
Memory overflow
• Reduce the complexity of the application
•
Reduce the number of parameters being accessed via the on board Modbus TCP protocol
• Reduce the number of parameters being accessed by the fieldbus communications option.
1007
Uninitialized pointer
• Record the error message and contact Technical Support
1010,
1101
to
1111
Initialization error
•
Record the error message and contact Technical Support
1200
to
1299
Communications option
error
•
Ensure the communications option is correctly fitted
•
Update the firmware in the AC30.
•
Replace the communications option
1300
Ethernet fault
•
Record the error message and contact Technical Support
1301
Modbus server
•
Record the error message and contact Technical Support
1302
HTTP server fault
•
Record the error message and contact Technical Support