Paradyne COMSPHERE 3610, Operator'S Manual

Page: 88 / 310

COMSPHERE 3600 Series Data Service Units
4-8 July 1999 3610-A2-GB91-90
Each selection leads to a functional subbranch of the
menu tree. Keep in mind when operating a DSU that five
factors determine what selections or configuration options
are available:
•
Whether the DSU is in Display mode only.
•
Whether the DSU is a control or tributary.
•
Whether selections are from the Local or Remote
branch (operating in Local or Remote mode).
•
Whether a DBM is installed.
•
Whether a TDM or MCMP circuit card is installed.
Except where specifically noted, the discussion of each
subbranch stemming from the Local branch menu applies
equally to a control or a tributary DSU.
NOTE
When any required menu item is
not displayed, press the or
key to scroll menu selections into
view. In most examples, additional
menu selections are shown
beneath the display.
Status Branch
The Status (Stat) branch reports on the health and
status of the DSU, as well as a DBM, TDM or MCMP, if
installed, the DTE interface, the quality of the PSTN
connection, the identity of the DSU (model number, serial
number, etc.), and the terminal’s power (checks the
presence of voltage on the DTE’s request-to-send lead).
Port Select only applies to TDM or MCMP applications.
The Status branch menu has five selections if a DBM is
installed, or four selections without a DBM. Table 4-2
lists the selections on the Status branch menu.
Table 4-2
Status Branch Menu Selections
Menu Selection Report Requested
H/S Health and Status
DTE DTE Leads Status
CircQ
1
Circuit Quality
ID Identity
TPwr Report Terminal Power
1
Available only if a V.32 DBM is installed.