Paradyne COMSPHERE 3610, Operator'S Manual

Page: 105 / 310

DSU Operations
4-25 3610-A2-GB91-90 July 1999
Figure 4-10. End-to-End Test
Results
When the message Command Complete is displayed,
any key except the key returns you to the End-to-End
Test submenu, where the Displ and Clr selections are
displayed. In the following example, EE ran for
11 seconds with two received block errors.
F1
DSU End-to-End:
Start
Displ Clr
F2 F3
If the End-to-End Test is already in progress, Start will
not be displayed.
F1
DSU EE: Active
Time:
0:00:11
F2
F3
F1
DSU EE: Active
Tot Block:
100
F2
F3
F1
DSU EE: Active
Rx Blk err:
2
F2 F3
F1
DSU EE: Active
Tx Blk err:
0
F2 F3
F1
DSU EE: Active
Rx TimOuts:
0
F2 F3
When the test is over, the top line displays Final
instead of Active. Table 4-7 shows the information
provided by an End-to-End Test.
Tests originating from an NMS operating with DPII
protocol add the receive block errors to the receive
time-outs and return the results to the NMS as receive
block errors.