Paradyne COMSPHERE 3610, Operator'S Manual

Page: 191 / 310

B-1 3610-A2-GB91-90 July 1999
Configuration Worksheets
Overview B-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instructions B-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
This appendix contains a complete set of Configuration
Worksheets used for the 3600 Series DSU and its options.
These sets include the following:
•
Configuration Worksheet for TDM Mode, which is
used for the DSU with TDM. This worksheet
includes the DBM and SNA Diagnostic Interface
options, as well, so no other worksheet is required.
•
Configuration Worksheet for MCMP Mode, which
is used for the DSU with MCMP. This worksheet
includes the DBM and SNA Diagnostic Interface
options, as well, so no other worksheet is required.
•
Configuration Worksheet for Bridge Mode, which
is used for the DSU with TDM or MCMP. This
worksheet includes the SNA Diagnostic Interface
option, as well, so no other worksheet is required.
•
Configuration Worksheet for Basic Mode, which is
used for the DSU without options, or the DSU with
the DBM and/or SNA Diagnostic Interface options.
•
Configuration Worksheet for Basic (DBM-V,
DBM-S, or DBM-D) Mode, which is used for the
DBM-V, DBM-S, or DBM-D that is connected to
the TDM or MCMP operating in Bridge mode.
A Configuration Worksheet summarizes the DSU’s
option sets, configuration options, and configuration
option values. The Configuration Option Tables in
Chapter 6 provide an explanation for each configuration
option within each option set based upon the DSU’s mode
of operation.
Refer to the Configuration Options section, Chapter 6,
when configuring the unit, or when more detailed
configuration information is needed.
Instructions
Configuration Worksheets can be used for reference, or
they can be used to record changes made to the DSU’s
configuration options or to record the configurations
saved to the Usr1, Usr2, or Usr3 areas of the DSU.
Make a copy of the Configuration Worksheet that is
provided. Complete the information at the top of each
worksheet first. If you have a Model 3610 (standalone)
DSU, enter your site in the location field; if you have a
Model 3611 (carrier-mounted) DSU, enter the DSU’s
carrier and slot location. (If recording Model 3611 DSU
configurations, make a copy for each DSU.)
Record the configuration or changes by circling the
appropriate configuration setting, either all of the
configuration options or all those that have been changed
from their factory-loaded default values. Circle the
appropriate hardware strap settings, as well.
B