Paradyne COMSPHERE 3610, Operator'S Manual

Page: 139 / 310

Configuration Options
6-11 3610-A2-GB91-90 July 1999
Table 6-2
(2 of 3)
Diagnostic DSU Configuration Options
2nd Ch(bps): 400
Next 100 400 800 1200 1600 Prev
In-band Secondary Channel Diagnostic Transport Speed (in bps). Determines the DSU’s port speed when
NonD (nondisruptive diagnostics) is selected and there is no excess bandwidth available for in-band
secondary channel transport operation. (This configuration option only appears when DiagType = NonD.)
The selection entered here allocates DSU port bandwidth to the in-band secondary channel transport. For
example, the DSU port speed and the DDS line speed are 9.6 kbps, and the Diagnostic Type entered is
NonD and the In-band Secondary Channel Diagnostic Transport Speed entered is 400. The resulting DSU
port speed is 9.2 kbps. (Refer to the following list for valid diagnostic speeds.)
NOTE: When the TDM is operating at a line speed greater than 19.2 kbps or with a multipoint configuration,
100 bps is not a valid in-band secondary channel transport rate.
If the DSU Rate(Kbps) is equal to Port
Speed, or if the underspeed port speed
and sum of the TDM ports is equal to
the aggregate speed on the DSU:
Valid diagnostic speeds are:
1.2 100, 400
2.0 100, 400
2.4 100, 400, 800
4.0 100, 400, 800
4.8 100, 400, 800, 1200, 1600
7.2 100, 400, 800, 1200
8.4 100, 400, 1600
9.6 100, 400, 800, 1200, 1600
12.0 100, 400, 800, 1200
14.4 100, 400, 800, 1200, 1600
16.8 100, 400, 800, 1200
18.0 100, 400, 1200
19.2 100, 400, 800, 1200, 1600
28.8 100, 400, 800
32 100, 400, 800, 1600
38.4 100, 400, 800, 1200, 1600
48 100, 400, 800, 1200, 1600
56 100, 400, 800, 1600
64 100, 400, 800, 1600