Paradyne COMSPHERE 3610, Operator'S Manual

Page: 219 / 310

Diagnostic Control Panel Messages Reference
C-17 3610-A2-GB91-90 July 1999
Table C-10
(4 of 8)
TDM/MCMP/Bridge Configuration Error Messages
Message Action Condition
Inval lowest Prt TDM or MCMP mode: DCE (first port
on TDM/MCMP) was previously
selected as the first port in a
digital-sharing group when DSU was
operating in Bridge mode, and DSU is
now operating in TDM or MCMP
mode.
In TDM or MCMP mode, the first port
on the TDM or MCMP circuit card is
identified as 1.
Select 1 as the first port for the
digital-sharing group via the Setup
path in the MUX configuration
submenu.
Bridge mode: 1 (first port on
TDM/MCMP) was previously selected
as the first port in a digital-sharing
group when DSU was operating in
TDM or MCMP mode, and DSU is
now operating in Bridge mode.
In Bridge mode, the first port on the
TDM or MCMP circuit card is
identified as DCE.
Select DCE as the first port for the
digital-sharing group via the Setup
path in the MUX configuration
submenu.
Invalid Port Spd MCMP mode: An attempt is made to
assign an invalid speed to a port.
Speeds of the individual channels can
be arbitrarily set to 2.4, 4.8, 9.6, 14.4,
19.2, or 38.4 kbps full-duplex.
You can correct the problem by
selecting 2.4, 4.8, 9.6, 14.4, 19.2, or
38.4 via the DSU path in the PrtSp
configuration submenu.