Panther PN-6730-UXP, User Manual

Page: 89 / 176

79
Diagnostic LEDs on the Electronics Module
LED Off Green Red Amber
Lamps, Front
and Rear Off On Failed Striking, but not lit yet.
If Lamp Control is off,
and the lamp has failed,
the LED will remain
amber.
Fans, all Running Failed;
all lamps shut off Failed, lamps not shut
off
Interlock Normal;
interlocks closed Lamp Bay cover open
or thermal cutoff open.
Temperature Normal Temperature
exceeded limit Temperature approach-
ing limit
RS232 Data On green for one second when any RS232 data is received
RS232 CMD On green for one second when data for this cube is received
Remote IR Flickers whenever IR is detected from any source, including Remote
Standby Normal
(lamps on) Ready for
Lamp ON command
Lockout Normal
(Standby or
lamps on) Lamps can’t be lit
during this time;
wait. An interlock or other
failure event occurred.
You must cycle power
to reset this Lockout.
Source Normal; valid
source detected Source not valid or
no source Testing for sync type
LEDs on the front edge of
the electronics module as
seen from the rear.