Panther PN-6730-UXP, User Manual

Page: 109 / 176

99
Move Sample Point
41 X coordinate BX$ AX# # = 0–255
42 Y coordinate BY$ AY# # = 0–255
43 Sample point disable/enable DR0 DR1 DR0 disables sample point; uses last sample
values. DR1 enables new data from the
sample point.
Color Balance
44 Color Temperature CT* CT@ C = Cool
N = Normal
W = Warm
? = custom color balance setting (only in
response to CT*)
45 Red Color Balance Adjust (white) BRU BRD BR$ CR#
# = 0–31
46 Green Color Balance Adjust
(white)
BGU BGD BG$ CG#
47 Blue Color Balance Adjust (white) BBU BBD BB$ CB#
48 Red Color Balance Adjust (gray) GRU GRD GR$ RR#
# = 0–15 49 Green Color Balance Adjust (gray) GGU GGD GG$ RG#
50 Blue Color Balance Adjust (gray) GBU GBD GB$ RB#
51 Gamma Control GON GOF GO* 1 = on, 0 = off
Auto Detect
52 Auto Detect AT0 AT1 AT* 0 = Auto Detect off
1 = Auto Detect on
2 = Actuate Auto Detect one time
53 Source Absent Message AS0 AS1 AS* 0 = Source Absent messages off
1 = Source Absent messages on
54 Curtain Message CM0 CM1 CM* 0 = off, 1 = on
55 Auto Message AM0 AM1 AM* 0 = Auto Detect messages off
1 = Auto Detect messages on
56 Auto Frequency/Phase AF* AF@ 0 = turn off Auto Freq/Phase
1= Auto Freq/Phase on (works only if Auto
Detect is on)
2 = Activate Auto Freq/Phase one time
57 Auto Position AP* AP@ 0 = Auto Position off
1 = Auto Position on (works only if Auto
Detect is on)
2 = Activate Auto Position one time
58 Enable / Disable Auto Re-strike LF1 LF0 LF* LF1 = auto re-strike active
LF0 = auto re-strike inactive
R
o
w Function
RS232
Commands RS232 Data
Comments Incr Decr Get Set