PANNOMED ECO LIFT 6H1.6P0.CCCC Instruction Manual Download Page 3

Page: 3 / 32

Instruction Manual ECO LIFT

Page 3 of 32

Version 2.03

Table of contents

Scope of application ....................................................................................................................... 4

Technical specifications .................................................................................................................. 5

Installation guidelines ..................................................................................................................... 6

Preparing the upper frame (version with flat top) ................................................................... 6

Preparing the upper frame (version with V-Top) ..................................................................... 8

Mounting the rails (necessary only for version with V-Top) .................................................... 8

Mounting the top on the base frame (lifting column) ............................................................. 9

Mounting the castors (optional accessory item) .................................................................... 11

Operation and handling ............................................................................................................... 13

Height adjustment (electrical version) ..................................................................................... 13

Height adjustment (hydraulic version) .................................................................................... 13

Maneuverability (optional castors as accessory) .................................................................... 14

Adjustment of tilting mechanism ............................................................................................. 15

Adjustment of V-Top mechanism (for version with V-Top) ................................................... 16

Version with heated top ............................................................................................................ 17

Usage of tie-down cleat (accessory part) ................................................................................ 20

Usage of drain gutter (accessory for V-Top version) ............................................................. 21

Power supply (electric version with power cord) ................................................................... 21

Error handling & Troubleshooting .............................................................................................. 22

Cleaning and disinfection instructions ........................................................................................ 23

Cleaning stainless steel top ...................................................................................................... 23

Cleaning synthetic top .............................................................................................................. 24

Supplementary cleaning recommendations for powder-coated surfaces ......................... 25

Maintenance & Repair ................................................................................................................... 28

Regular maintenance check ..................................................................................................... 28

Spare parts and accessories ......................................................................................................... 29

Safety responsibility ....................................................................................................................... 31

Special warnings ............................................................................................................................ 32

Product warranty ............................................................................................................................ 32

Summary of Contents for ECO LIFT 6H1.6P0.CCCC

































Search results

Summary of Contents for ECO LIFT 6H1.6P0.CCCC

Reviews:

Related manuals for ECO LIFT 6H1.6P0.CCCC

Brands by name

Popular brands

PANNOMED ECO LIFT 6H1.6P0.CCCC, Instruction Manual

Search results

Summary of Contents for ECO LIFT 6H1.6P0.CCCC

Reviews:

Related manuals for ECO LIFT 6H1.6P0.CCCC

Brands by name

Popular brands