Instruction Manual ECO LIFT
Page 15 of 32
Version 2.03
Adjustment of tilting mechanism
The tilt mechanism is adjustable by locking and releasing the clamping lever located on the
bottom side of the table top (see pictures below).
To change the position of the table top using the tilting mechanism, the user first has to
loosen the clamping lever or move it to the horizontal position - as shown in the figure below
- such that the table top can now be maneuvered or freely adjusted within the tilting
movement.
When the clamping lever is loosened, the operator is able to move the plate to the desired
tilting or horizontal position by manually grasping and holding the table top on the long
side (see picture below).
Once the desired positioning has been attained with the help of the tilting mechanism and
the table top is correctly retained in this setting, the user is required to move the clamping
lever to the vertical position for locking the table top at the new level.
Tilting
(Lift up)
Tilting back
(Push back)
Moveable
Blocked
