Instruction Manual ECO LIFT
Page 21 of 32
Version 2.03
If a change in the positioning of the accessory is necessary, loosen the respective locking
screw, adjust the position on the side rail accordingly and secure the tie-down cleat once
again by tightening the locking screw.
Usage of drain gutter (accessory for V-Top version)
The " drain gutter" accessory supplied with the V-
Top version of the ECO LIFT table is used to collect
and retain liquids and residues that may arise
during treatment and surgical procedures.
The drain gutter can be inserted into the fixture
provided for this purpose on the front side of the
product as shown in the illustration to the right.
Removing the drain gutter from the fixture can also
be done manually by pulling it out and lifting it from
the respective fixture on the front side of the
product.
Power supply (electric version with power cord)
The product is equipped with a power plug in the electric version. This provides voltage to
all electronic components that are installed in the table, especially the electric actuators.
A suitable power cord including a power plug is included in the scope of delivery. To avoid
injuries and other malfunctions, only connect the power cord to a power circuit when the
table is actually in operation.
Inserting
drain gutter
Pulling out
drain gutter
