Instruction Manual ECO LIFT
Page 11 of 32
Version 2.03
Subsequently, fix the top with delivered screws (8pcs. M8) as well as corresponding washers
into the 8 screw holes from above with the assistance of a 6 mm Allen key, as shown in the
picture instructions above. Please note that if different screw types are included in your
scope of delivery, the stronger/thicker screws (larger diameter) are required to be
appropriated in the given context.
Lastly, to stabilize and fix the entire table top and base connection, tighten the mounted
screws accordingly so that no more shaking of the parts is possible. However, please also
make sure not to tighten the screws too tightly such that they are damaged.
Mounting the castors (optional accessory item)
In case castors are delivered as accessories, these are not yet connected to the product and
must be mounted accordingly by the user on the bottom side of the table frame.
Thus, initially unscrew the currently mounted (default) adjustable rubber legs on the base
frame of the product as shown below.
Unscrewing the
rubber legs
(counterclockwise)
`
`
`
`
`
`
`
`
