Instruction Manual ECO LIFT
Page 13 of 32
Version 2.03
Operation and handling
The adjustment of the product is usually carried out either by a foot switch or a hydraulic
pump, depending on the selected product configuration. These operational elements are
attached to the side of the table. Consequently, the corresponding mechanism must be
operated to adjust the height of the table.
Height adjustment (electrical version)
Height adjustment of the product in electric version is performed by an electric actuator
which is powered by the electricity mains of a power cord connection.
Pressing the left button on the foot switch raises the table or initiates an upward movement.
In the opposite case, pressing the right button lowers the table or initiates a downward
movement.
The button must remain pressed until the desired height is attained. Releasing this button
brings the table plate to a standstill at the desired height.
Height adjustment (hydraulic version)
The height adjustment of the product in hydraulic version is performed by an installed
hydraulic system.
Repeated pumping of the pedal (actuating downwards) raises the table or initiates an
upward movement. For this purpose, the user must actuate the pedal repeatedly until the
desired height is reached. Refraining from pumping brings the table plate to a standstill at
the desired height.
Lifting
Lowering
