RMS Compact II
Version 1.0.7 September 2016
Page 6
1 Introduction
Overview
RMS Compact II is a low cost networkable Zero-U rack monitoring device. The RMS
Compact II provides both SNMP and Web monitoring and management.
Some of the main features of the RMS Compact II unit are:
Modular design permits future expansion.
Secure web management and configuration interface.
SNMP enabled.
Twelve monitoring channels.
Optional LCD Status module.
Safety and Installation Statement
Grounding
This is a Class III product powered by a Class I external power supply, which
provides reinforced insulation between Primary and Secondary circuits.
For correct operation and improved safety, the 4mm earth stud (labeled
“Earth” on rear face of unit) should be connected to an electrical earth ground
with a minimum 16AWG conductor.
Caution: Risk of electrical shock.
If a user contacts 240Vac @ 3A, it may cause serious injury or death.
If the network covers an area served by more than one power distribution system, be
sure their electrical safety grounds are securely interconnected.
Network cabling may occasionally be subject to hazardous transient voltages (such as
lightning or disturbances in the electrical utilities power grid). Handle exposed metal
components of the installation with caution.
Servicing
There are no user-serviceable parts inside these products. Any maintenance or repair
must be performed by approved service-trained personnel.
This product does not have a power switch; it is powered on when the adapter’s power
cord is plugged in.
