RMS Compact II
Version 1.0.7 September 2016
Page 26
Network Setup - IP Configuration
The IP Config page permits setting of the RMS Compact II units own management IP
address.
Figure 4-2.
IP Configuration
System Name
System name may be specified here. This would normally be the fully qualified
domain name (FQDN) of the device but this is not enforced.
The value specified here can be retrieved by interrogating the ‘sysName’ node via
SNMP.
This allows SNMP management platforms to obtain unique names for units where
specified.
This value has no effect on network communications and the unit will function
correctly with or without a value.
IP Address
A standard IP address may be entered here. The address is entered in dotted decimal
format.
Eg: 192.168.0.44 or 22.10.45.33
The address entered here will be the address by which the RMS Compact II unit is
accessed and managed.
