RMS Compact II
Version 1.0.7 September 2016
Page 15
Default Settings
The RMS Compact II unit in factory default condition will have the following
network configuration. Advanced users may wish to make use of these settings to
access the RMS Compact II units web management interface immediately and
proceed with configuration.
Users who do not know how to do this should proceed through this chapter for
information on how to configure the RMS Compact II unit.
Table 3-1.
RMS Compact II Defaults
IP Address:
192.168.0.253
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.0.1
Web Management Address:
http://192.168.0.253/
Default username:
admin
Default password
admin
Note!
Password entries are case sensitive!
Connecting to the Web Management Interface
The RMS Compact II monitoring solution can be configured entirely using the built in
web management interface.
In order to connect to the web management interface for the first time the IP address
of the PC to be used may need to be changed.
This section will detail how to connect to change the IP address and connect to the
web management interface.
