RMS Compact II
Version 1.0.7 September 2016
Page 50
RMSCompact2ViewUsers
Users placed into this group will have View privileges on RMS Compact II units.
RMS Compact II Unit Configuration
For LDAP authentication to function each RMS Compact II unit requires certain
configuration values to be provided.
Figure 5-2.
LDAP Setup
The normal steps are listed below:
If one LDAP server is to be used select
Enabled
– Primary
.
Enter a descriptive name, E.g: AD_Server_1 into
Display Name
.
Enter the complete DN of the top level OU as seen in
Enter the DN of where users that are members of RMS Compact II access
groups can be found in the Directory. These DNs can be entered into
User
Base DN 1
and
User Base DN 2.
Finally
Save
should be clicked to bring any changes into effect.
