RMS Compact II
Version 1.0.7 September 2016
Page 45
This toggle acts as a master control to any logic configured for a relay. When selected
Use Logic
may be enabled on the Status page.
It is only possible to select this option if logic has been specified in the
Relay
Specific Configuration
page.
See
Section
“Relay – Configure – Config” for further information and configuration
examples.
Virtual Relays 4
– 18 (V)
Relays 4 -18 are virtual relays, i.e. there is no physical relay present (1-3 have an
actual relay that can be switched either manually or using the in-built Boolean login
capability). Virtual Relays 4 – 18 can be used for generating traps based on Boolean
logic calculations even though a physical relay is not present.
