RMS Compact II
Version 1.0.7 September 2016
Page 24
Changing the unit IP address
Click the
Network Setup
tab on the top menu bar then select the
Users
button found on the left menu bar.
Figure 3-12.
IP Configuration
The IP address, subnet mask and gateway that the RMS Compact II
will use
must be entered here.
Contact your network adminstrator if you do not know the values that you
must enter here.
Click
Save
to confirm the changes.
Click
Restart
and select
Restart Now
to reboot the unit and bring the changes
into effect.
Note!
Once the IP configuration has changed the RMS
Compact II unit will no longer be accessible via the
default IP address as the new address will be
operational.
The RMS Compact II unit should now be connected to the main network and
any further required configuration done via the units new IP address.
