RMS Compact II
Version 1.0.7 September 2016
Page 32
Network Setup - SNMP Trap Receivers
The IP address, community string and access permissions are specified here for up to
five Network Management Stations.
Figure 4-6.
SNMP Trap Receivers
IP Address
Any machine which will be required to receive SNMP traps sent from this unit must
be entered here. Usually any SNMP NMS entries should also be entered here.
Community String
The required community string must be entered here. The default for many devices is
public.
It is recommended that the community string be changed as it is effectively an access
password.
Receive Traps
Receive traps
Enabled
setting allows the specified NMS to receive the units standard
range of traps.
Receive traps
Enabled (incl Auth fails)
, will cause the unit to issue traps if an
unauthorised IP address attempts to access the units SNMP functions.
Receive traps
Disabled
prevents traps from being sent to the specified NMS IP
address.
