RMS Compact II
Version 1.0.7 September 2016
Page 19
Figure 3-7.
Internet Protocol (TCP/IP) Properties screen
On the Local Area Connection Properties Click
OK
to
return to the desktop.
Congratulations you have just changed your IP address and can now proceed with the
next stage of the RMS Compact II Rack Monitor setup.
Connecting to the web management interface
Connect the RMS Compact II MCUs network connection directly to a PCs
Ethernet network card using a
crossover cable
.
Note!
A crossover cable must be used when directly
connected the RMS Compact II MCU to a PCs network
card.
Power the RMS Compact II unit.
Open a web browser.
Enter into the address bar http://192.168.0.253
