80
[Resolution]
Select a resolution for images to be recorded.
Field:
Standard resolution (704 x 240)
Frame 3D On:
High resolution (704 x 480) with the
motion blur compensation function
Frame 3D Off:
High resolution (704 x 480)
Default:
Field
[Maximum REC rate] (Only for HD716K)
Select the maximum recording rate that is available for each
channel.
The available values vary depending on the setting of
"Resolution".
• When "Frame 3D On" or "Frame 3D Off" is set for
"Resolution"
16ch-15 ips:
Up to 15 ips can be set for each channel.
8ch-30 ips:
Up to 30 ips can be set for each channel.
However, the cameras that can be used for recording
are restricted to 8.
• When "Field" is set for "Resolution"
16ch-30 ips:
Up to 30 ips can be set for each channel.
Select the following setting items for each recording mode
(manual recording, schedule recording, event recording, pre-
event recording and post-event recording).
On the first page, the setting items for CAM 1 to 4 are dis-
played.To display the other camera channels, select the
[Next page
C
] button.
■
Manual rec./Schedule rec./Event rec.
[Quality]
Select the image quality from the following.
XF (Extra Fine):
Extra fine quality
SF (Super Fine):
Super fine quality
FQ (Fine):
High quality
NQ (Normal):
Standard quality
EX (Extended):
Low quality (Recording for a long period
of time)
Default:
FQ
[Rate(ips)]
Default and available values differ depending on the setting
of "Resolution".
When "Off" is selected for a specified camera channel, imag-
es from a camera channel set to "Off" will not be recorded.
• When "Frame 3D On" or "Frame 3D Off" is selected
for "Resolution"
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for
HD716K)
Default:
7.5ips (15ips for HD716K)
• When "Field" is selected for "Resolution"
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips/ 30ips (Only
for HD716K)
Default:
15ips (30ips for HD716K)
When "8 ch-30 ips" is selected for "Maximum REC Rate",
"30 ips" is available for "Rate".
[Pre-event Duration]
Select the recording duration for the pre-event recording.
0s/2s/5s/10s/20s/30s/1min/3min/5min/10min/15min
Default:
0s
Note:
• It may be possible that the actual recording will be lon
-
ger than the selected recording duration.
• Pre-event recording is not performed when "0s" is
selected.
• When images are set to be recorded together with
audio, the audio may not be recorded at the beginning
of the pre-event recording.
[Post-event Duration]
Select the recording duration at an alarm occurrence (post-
event recording duration).
2s/5s/10s/20s/30s/1min/3min/5min/10min/15min
Manual:
Recording duration will be as follows depending on
the alarm type.
Video motion detection (VMD):
Recording will be per-
formed for 8 seconds.
At a video loss occurrence:
Recording will be per-
formed during a video loss occurrence
Terminal alarm:
Recording will be performed while the
terminal alarm signal is being supplied.
Camera site alarm:
Recording will be performed for 8
seconds.
Con.(Continue):
Record until the ALARM RESET button is
pressed
[Back] button
Closes the "Program setup" page and returns to the [Time
table] tab.
Summary of Contents for WJ-HD616/1000
Page 155: ...155...
