78
Step 3
Set the end point of the detection area.
Press the [SET] button after moving the cursor to the desired
end point of the detection area using the arrows button (
C
D
A
B
). To finish the detection area setting, select the
[Back] button.
Note:
• Detection areas will be set according to the grid divided
in 16 x 14 segments. It may be possible that the actual
detection areas will not be exactly the same as the des-
ignated start and end points.
• To delete a set detection area, select the [Delete area]
tab on the detection area setup page, and click the
[Delete] button of the area (A to D) to be deleted.
• When using a mouse, click the end point. Up to 4 areas
can be set by repeating Step 1 to 3.
Step 4
Set the detection sensitivity for each detection area.
Move the cursor to the pull-down menu of "Sensitivity" of the
detection area to be set (A to D) using the arrows button (
C
D
A
B
). Then, rotate the JogDial (inside) to select the
detection sensitivity from the following.
Off:
Ignores motion in the selected area.
Low:
Low sensitivity
Mid:
Standard sensitivity
High:
High sensitivity
Step 5
Select the [Back] button after completing the settings.
→
The detection area setup page will be closed.
Summary of Contents for WJ-HD616/1000
Page 155: ...155...
