manualshive.com logo in svg

Panasonic WJ-HD616/1000, Installation Manual

Share
Download
Panasonic WJ-HD616/1000 Installation Manual Download Page 125

125

Check the event log

The event logs (occurrence time & date and event details) will be displayed in list form.
Refer to the Operating Instructions (PDF) for further information about the events.
When the [Event log] button of the [Logs] tab is selected, the following page will be displayed. 
Up to 750 logs are saved.
     

About event logs

VMD-*:

 Motion has been detected.

LOSS-*:

 Video loss has occurred.

COM-**:

 Command alarm has occurred.

TRM-**:

 Terminal alarm has occurred.

SITE-*:

 Camera site alarm has occurred.

CMTN-*:

 Motion has been detected. (SD5Link cameras)

CRMV-*:

 Appearance/disappearance of stationary objects 

has been detected. (SD5Link cameras)

CSTY-*:

 Objects has been staying for the specified time. 

(SD5Link cameras)

CDRT-*:

 An object moves to the specified direction. 

(SD5Link cameras)

CTRM-*:

 Camera terminal alarm has occurred. (SD5Link 

cameras)

CSCD-*:

 Scene change has been detected. (SD5Link cam-

eras)

EMR:

 Emergency recording has occurred.

  *  "*" indicates camera channel numbers (1 to 16).
  *  "**" indicates alarm numbers.
     

Check the network error log

The network error logs (occurrence time & date and error details) will be displayed in list form.
Refer to the Operating Instructions (PDF) for further information about the events.
When the [Network log] button of the [Logs] tab is selected, the following page will be displayed.
Up to 1 000 logs are saved.
Refer to page 140 for further information about the error logs.

Summary of Contents for WJ-HD616/1000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands