140
About the error log
The following are the descriptions about the contents of the error log and the network log.
• "x" indicates the extension unit number.
• "y" indicates the HDD unit number.
Content
Error log
Network Log
Display on
Monitor 2
Output from the
connector at
the rear panel
Outage detection
POWER LOSS
–
POWER
Error + Outage
processing end*
Recover from a power out-
age
POWER RECOVERED
–
–
–
Alteration detection
ALTERED **CH
–
ALT–*
(*: camera ch)
Error
No response from an
address of Panasonic
alarm protocol
PANASONIC_ALM_RES_ERR
–
–
–
Failed to resolve a address
of Panasonic alarm proto-
col from DNS
PANASONIC_ALM_ADD_ERR
–
–
–
Other error for an address
of Panasonic alarm proto-
col
PANASONIC_ALM_OTHER_
ERR
–
–
–
Parameter initialization
error
–
–
–
–
FAN warning
Recorder: MAIN FANy ERROR
Extension unit: EXTx FANy
ERROR
–
FAN
Error
Thermal error warning
Recorder: MAIN THERMAL
ERROR
Extension unit: EXTx THERMAL
ERROR
–
THERMAL
Error
Reboot by the system
error
SYSTEM REBOOT
–
–
–
HDD remove error (proper-
ly recognized HDD was
removed without opera-
tions on the front panel)
Recorder: MAIN-y SWAP
WARNING
Extension unit: EXTx-y SWAP
WARNING
–
SWAP_ERR
HDD error
HDD write error
• Per HDD (In the single mode)
Recorder: MAIN-y WRITE
ERROR
Extension unit: EXTx-y WRITE
ERROR
• Per unit (in the RAID 5 or
RAID 6 mode)
Recorder: MAIN WRITE ERROR
Extension unit: EXTx WRITE
ERROR
–
–
–
HDD read error
• Per HDD (In the single mode)
Recorder: MAIN-y READ
ERROR
Extension unit: EXTx-y READ
ERROR
• Per unit (in the RAID 5 or
RAID 6 mode)
Recorder: MAIN READ ERROR
Extension unit: EXTx READ
ERROR
–
–
–
Summary of Contents for WJ-HD616/1000
Page 155: ...155...