115
Step 5
Set the start point of the detection area.
Move the cursor to the desired start point, and click the
mouse button.
Step 6
Set the end point of the detection area.
Move the cursor to the desired end point, and click the
mouse button. To determine the detection area, select the
[Back] button.
Note:
• Detection areas will be set according to the grid for the
detection areas of the SD5 camera. It may be possible
that the actual detection areas will not be exactly the
same as the designated start and end points.
• Up to 2 areas for "Motion det." and "Object det." respec
-
tively by repeating Step 4 to 6.
Note:
• To delete a set detection area, select the [Area delete]
tab on the setup page for camera's i-VMD function, and
click the [Delete] button of the area (White/Blue/Green/
Red) to be deleted.
Step 7
Set the size of an object to be detected ("Size").
It is possible to apply the setting to "Motion det." and
"Object det." respectively.
Off:
Detects any moving objects regardless of the size.
Small/Medium/Large:
Determines the minimum size of
an object to be detected by the SD5Link camera.
On(Depth):
Enables the depth correction function of the
SD5 camera.
Refer to page 117 for further information about how
to set the detection depth.
Step 8
Select the detection sensitivity of the detection areas set for
"Motion det.".
Low:
Low sensitivity
Mid:
Standard sensitivity
High:
High sensitivity
Summary of Contents for WJ-HD616/1000
Page 155: ...155...
