131
Format the pre-event recording area
Configure the following settings relating to the pre-event recording area.
• Assign the capacity of pre-event recording area to each camera channels.
• Format a hard disk drive set for another recording area again to set for the pre-event recording area.
• Format a hard disk drive to add a camera channel not assigned to the existing pre-event recording area.
Important:
• Before formatting the hard disk drive to set for a pre-event recording area, configure the setting for the pre-event duration
(
+
page 80) for the camera channel to be assigned to the pre-event recording area.
Step 1
Select the [Format] button on the disk configuration page.
→
The [Format] tab will be displayed. (
+
Page 129)
Step 2
Select the [Pre-event area] tab.
Step 3
Select the method of how to set the pre-event recording
area, and then select the [Set] button.
Create a new pre-event recording area:
A hard disk drive
will be newly set for the pre-event recording area.
Add a camera CH to the existing pre-event recording
area and determine its capacity:
A camera channel
will be newly assigned to the existing pre-event record-
ing area.
Summary of Contents for WJ-HD616/1000
Page 155: ...155...
