ENGLISH - 89
[Network Setup] page
1 [LAN Setup]
Sets the items of the wired LAN.
[Obtain an IP address automatically] / [Use the
following IP address]
Selects [Obtain an IP address automatically] if you
want to enable the DHCP client.
[IP Address]
Enters the IP address when not using a DHCP
server.
[Subnet]
Enters the subnet mask when not using a DHCP
server.
[Gateway]
Enters the default gateway address when not using
a DHCP server.
[DNS]
Enters the DNS server when not using a DHCP
server.
Allowed characters: Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
2 [Wireless Setup]
Sets the items of the wireless LAN.
[Wireless LAN]
Selects [Enable] when you want to enable the
wireless LAN function.
[SSID]
The character string will be able to change when
the projector is connected.
[Channel]
Selects the channel from [1] ~ [11] for use.
[Access Point Encryption]
Selects [Disable] when encryption is disabled.
Selects [WPA2PSK_AES] when encryption is
enabled.
[Access Point key]
Enters the encryption key. (8 to 63 alphanumerics)
Checks [Show key] to make the characters
visible.
3 [Apply]
Updates the settings.
Note
f
Changing LAN settings while connected to the LAN may cause the connection to cut out.
f
When [Factory default] is executed, the setting values of [Wireless Setup] will be returned to the factory default settings.
f
The encryption of the wireless LAN is disabled before the projector leaves the factory. If you want to use the wireless LAN to
communicate, it is recommended that the encryption of the [Wireless Setup] is set to [WPA2PSK-AES] for security.
Chapter 5 Operation of Function - Web control function