38 - ENGLISH
When using the control panel
The input for projection can be selected by displaying the input screen with the control panel.
1) Press the <INPUT/ENTER> button.
f
The Input screen is displayed.
2) Press
as
to select one item and then press the <ENTER> button.
f
The selected input will be projected.
How to adjust the state of the image
When setting up the projector for the first time or setting up at a new place, you must perform the following operations.
1) Adjust the projection angle.
f
If the projected image tilts to the left or right, adjust the adjustable feet until the projected image is in a level state.
If the projected image is located below the screen, extend the adjustable feet to adjust the position of projected image.
For details, see “Adjusting adjustable feet” (
x
page 39).
f
Adjust from the [Expand] menu → [Keystone] (
x
page 61) when the projected image is distorted.
2) Adjust the focus.
f
Rotate the focus ring to adjust the focus of the projected image.
Focus ring
Note
f
It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.
f
If you adjust the focus, you may need to adjust the size of the image by changing the distance between the screen and the
projector.
Chapter 3 Basic Operations - Projecting
