18 - ENGLISH
r
Wireless communication radio waves cannot penetrate steel reinforcements, metal,
concrete, etc.
Communication is possible through walls and floors made from materials such as wood and glass (except
glass containing
wire mesh), but not through walls and floors made from steel reinforcements, metal, concrete, etc.
r
Do not use the projector as much as possible in a location where static electricity is
generated.
The communication via wireless LAN or wired LAN may be prone to disruption when the projector is used in a location
where static electricity or noise is generated.
There is a rare case that the LAN connection may not be established due to static electricity or noise, so in such case, turn
off the projector, remove the source of problematic static electricity or noise, and turn the projector back on.
r
Using the projector outside the country
Note that depending on countries or regions there are restrictions on the channels and frequencies at which you can use
the wireless LAN.
Application software supported by the projector
The projector supports following application software. For details or downloading each application software, visit the Panasonic
website (https://panasonic.net/cns/projector/).
f
Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and flat panel display) connected to
an intranet.
f
Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and notifies of
abnormality of such equipment and detects the signs of possible abnormality. “Early Warning Software” is preinstalled in
the “Multi Monitoring & Control Software”. To use the early warning function of this plug-in software, install “Multi Monitoring
& Control Software” in the PC to be used. By enabling the early warning function, it will notify of the approximate time to
replace the consumables for the display devices, to clean each part of the display devices, and to replace the components of
the display devices, allowing to execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for 90 days after
installing the “Multi Monitoring & Control Software” into a PC. To continuously use after the 90 days, it is necessary to
purchase the license of “Early Warning Software” (ET-SWA100 Series) and perform the activation. Also, depending on the
type of license, the number of display devices that can be registered for monitoring varies. For details, refer to the Operating
Instructions of “Multi Monitoring & Control Software”.
f
Presenter Light Software
This application software compatible with Windows computers transmits the computer screen to the projector via wireless
LAN or wired LAN.
f
Wireless Projector
This application software for iOS/Android is used to project files such as PDF or image by transmitting to the projector via
wireless LAN.
Storage
When storing the projector, keep it in a dry room.
Disposal
When disposing of the product, ask your local authority or dealer about the correct methods of disposal.
The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local authorities or dealer about proper
disposal of the unit.
Dispose of used batteries according to the instructions or your local disposal rule or guidelines.
Cautions on use
r
To get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over
windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.
r
Do not touch the surface of the projector lens with your bare hand.
If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen.
Chapter 1 Preparation - Precautions for use
