64 - ENGLISH
Items
Operation
Adjustment
[Curved
correction X
Offset]
Press the
w
button.
Used to correct the right side vertical
lines. Extend the top and bottom while
keeping the center part as it is.
Press the
q
button.
Used to correct the left side vertical
lines. Extend the top and bottom while
keeping the center part as it is.
Press the
a
button.
Used to correct the both sides of the
vertical lines. Extend the lower corners
while keeping the center part and the
upper part as they are.
Press the
s
button.
Used to correct the both sides of the
vertical lines. Extend the top corners
while keeping the center part and the
lower part as they are.
[Curved
correction Y
Offset]
Press the
w
button.
Used to correct the right side
horizontal lines. Extend the top and
bottom while keeping the center part
as it is.
Press the
q
button.
Used to correct the left side horizontal
lines. Extend the top and bottom while
keeping the center part as it is.
Press the
a
button.
Used to correct the both sides of the
horizontal lines. Extend the lower
corners while keeping the center part
and the upper part as they are.
Press the
s
button.
Used to correct the both sides of the
horizontal lines. Extend the top corners
while keeping the center part and the
lower part as they are.
Note
f
Either [H/V Keystone] or [Corner correction] setting value is valid. If the other item is adjusted after [H/V Keystone] or [Corner
correction] was adjusted, the previous setting value will be reset.
f
The [Curved correction X Offset] and the [Curved correction Y Offset] cannot be adjusted independently. After adjusting the
[Curved correction X/Y Gain] at the beginning, please adjust the [Curved correction X Offset] and the [Curved correction Y
Offset].
f
Press the <KEYSTONE> button on the control panel or on the remote control when the
[H/V Keystone]
,
[Corner
correction]
or
[Curved correction]
individual adjustment screen is displaying, the individual adjustment screen will switch
as follows.
- [H/V Keystone]
[Corner correction] (Upper left)
[Corner correction] (Upper right)
[Corner correction] (Lower right)
[Corner correction] (Lower left)
[Curved correction X/Y Gain]
[Curved correction X Offset]
[Curved correction Y
Offset]
[H/V Keystone]
...
f
Correcting up to ±15° for the tilt in the vertical direction and ±15° for the tilt in the horizontal direction are available for
adjustments with [Keystone]. However, the image quality will degrade and it will get harder to focus with more correction.
Install the projector so that the correction will be as small as possible.
f
Screen size will also change when [H/V Keystone] is used to perform various adjustments.
f
Aspect ratio of the image size may shift depending on the correction.
Resetting the correction state of [Keystone]
Cancel the state corrected with the screen adjustment function, and return to factory default.
1) Press
as
to select [Keystone].
2) Press the <ENTER> button.
f
The
[Keystone]
screen is displayed.
3) Press
as
to select [Reset value].
4) Press the <ENTER> button.
f
The state of the keystone correction is canceled.
[Logo]
Set logo selection, user logo registration and logo operation security.
1) Press
as
to select [Logo].
Chapter 4 Settings - [Expand] menu
