ENGLISH - 69
11) Press
as
to switch the setting time of [Ready Countdown].
f
The items will switch each time you press the button.
f
The waiting time before the projector switches from the ready state to the standby state can be set from 1 minute to 30
minutes in increments of 1 minute.
f
When set to [0 Min], the projector will stay at the ready state instead of entering standby state.
[Filter counter]
Check the usage time of the air filter and set the cleaning cycle of the air filter. Also, the usage time of the air filter can be reset.
1) Press
as
to select [Filter counter].
2) Press the <ENTER> button.
f
The
[Filter counter]
screen is displayed.
3) Press
as
to switch the item.
f
The items will switch each time you press the button.
[Filter counter]
Displays the usage time of the filter.
[Timer]
Sets the cleaning cycle of the filter.
[Filter counter
reset]
Resets the usage time of the filter.
Setting [Timer]
If you want to clean the air filter periodically, set the cycle time. Once the usage time of the filter reaches the set time, the filter
warning icon [
] is displayed on the projected screen.
1) Press
as
to select [Filter counter].
2) Press the <ENTER> button.
f
The
[Filter counter]
screen is displayed.
3) Press
as
to select [Timer].
4) Press the <ENTER> button.
5) Press
as
to switch the setting of the time.
f
The items will switch each time you press the button.
[Off] → [100 H] → [200 H] → [300 H]
f
The filter warning icon [
] will not be displayed if [Timer] is set to [Off].
[Filter counter reset]
1) Press
as
to select [Filter counter].
2) Press the <ENTER> button.
f
The
[Filter counter]
screen is displayed.
3) Press
as
to select [Filter counter reset].
4) Press the <ENTER> button.
f
The
[Filter counter Reset?]
screen is displayed.
5) Press
as
to select [Yes] and then press the <ENTER> button.
f
The
[OK?]
screen is displayed.
6) Press
as
to select [Yes] and then press the <ENTER> button.
[Test pattern]
Displays the Test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press
as
to select [Test pattern].
2) Press the <ENTER> button.
f
The
[Test pattern]
screen is displayed.
3) Press
as
to switch the item.
Chapter 4 Settings - [Expand] menu