Chapter 6
Maintenance — Light source/temperature/filter indicators
220 - ENGLISH
r
When the Smoke Cut Filter (Model No.: ET-SFR330) is attached
Indicator status
Status
Solution
Lighting in red
f
The filter is clogged.
f
The runtime of the filter exceeds the
recommended time to replace the
filter.
f
The temperature around or outside
the projector is abnormally high.
f
Replace the Smoke Cut Filter in the following cases. (
g
The filter is dirty.
g
The recommended time to replace the filter has been exceeded.
f
Remove any objects if they are blocking the air intake/exhaust port.
f
Do not use the projector at an altitude of 1 400 m (4 593') or higher above
sea level.
Blinking in red
f
[FILTER TYPE]
*1
is set to [NORMAL].
f
Set [FILTER TYPE]
*1
to [SMOKE CUT].
*1
[FILTER TYPE] can be set in the [PROJECTOR SETUP] menu
→
[FILTER SETTING]
→
[FILTER TYPE].
Note
f
If the filter indicator <FILTER> is still lit or blinking after taking the measures, ask your dealer for repair.
