Panasonic PT-RQ32KU, Operating Instructions Manual

Page: 78 / 285

Chapter 3 Basic Operations — Projecting
78 - ENGLISH
Moving the projection lens to the home position
Operate in following procedure to move the projection lens to the home position.
When operating from the main menu
1) Press the <MENU> button.
f
The [MAIN MENU] screen is displayed.
2) Press
as
to select [PROJECTOR SETUP].
3) Press the <ENTER> button.
f
The [PROJECTOR SETUP] screen is displayed.
4) Press
as
to select [LENS].
5) Press the <ENTER> button.
f
The [LENS] screen is displayed.
6) Press
as
to select [LENS HOME POSITION].
7) Press the <ENTER> button.
f
The confirmation screen is displayed.
8) Press
qw
to select [OK], and press the <ENTER> button.
f
[PROGRESS] is displayed in the
[HOME POSITION]
screen, and the projection lens is moved to the origin
position.
Note
f
[LENS HOME POSITION] cannot be executed when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT
SELECTED].
f
[LENS HOME POSITION] will not operate correctly when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set incorrectly.
Change the setting if the type is different from the projection lens attached to the projector.
f
The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f
The home position does not match with the optical image center position.
f
The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (
x
page 79).
f
The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
When operating from the lens shift adjustment screen
1) Press the <DEFAULT> button on the remote control while displaying the lens shift adjustment screen.
f
The confirmation screen is displayed.
2) Press
qw
to select [OK], and press the <ENTER> button.
f
[PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f
The [HOME POSITION] screen is not displayed when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE] is set to [NOT
SELECTED].
f
The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE] is set
incorrectly. Change the setting if the type is different from the projection lens attached to the projector.
f
The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS CALIBRATION]
is not executed.
f
The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (
x
page 79).
f
The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
f
You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for at least three seconds.