Chapter 3
Basic Operations — Operating with the remote control
ENGLISH - 53
f
The moving screen is displayed when executing the remote control operation, and the
[DIGITAL ZOOM]
individual adjustment screen is not displayed.
f
The
[DIGITAL ZOOM]
individual adjustment screen is displayed when executing the menu operation. For
details, refer to [DISPLAY OPTION] → [OTHER FUNCTIONS]. (
x
page 85)
2) Press the following buttons to move the location of the image or adjust the magnification.
f
The digital zoom function is canceled if the <D.ZOOM -> button/<D.ZOOM +> is pressed for three seconds
or more.
Operation menu/Buttons
Operation
Adjustment
Moving screen
Remote control operation button
Press the
a
button.
Moves the image to the bottom.
Press the
s
button.
Moves the image to the top.
Press the
q
button.
Moves the image to the right.
Press the
w
button.
Moves the image to the left.
Press the <MENU> button.
Moves the image to the upper left.
Press the <RETURN> button.
Moves the image to the upper right.
Press the <ENTER> button.
Moves the image to the center.
Press the <DEFAULT> button.
Moves the image to the lower left.
Press the <FUNCTION> button. Moves the image to the lower right.
Press the <D.ZOOM +> button.
Increases magnification.
Press the <D.ZOOM -> button.
Decreases magnification.
Note
f
The magnification is not displayed in the moving screen.
f
The digital zoom function is canceled if the input signal changes during a digital zoom.
f
During a digital zoom, the freeze function is disabled.
f
The digital zoom function may not work properly for some still image-based signals.
Using the presentation timer function
The presentation timer function can be operated.
Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.
button
1) Press the <P-TIMER> button.
f
The count is started.
f
The elapsed time or the remaining time is displayed at the bottom right of the projected image.
2) Press the <P-TIMER> button again.
f
The count is stopped.
3) Press the <P-TIMER> button again.
f
The count is resumed.
Note
f
The presentation timer is ended by holding the <P-TIMER> button down for at least three seconds.
f
For details such as presentation timer function settings, refer to [DISPLAY OPTION] menu → [P-TIMER] (
x
page 84).
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
w
button
▼ button
q
button
<MENU> button
<RETURN> button
<FUNCTION> button
<DEFAULT> button
<ENTER> button
a
button
Fig. 1
Screen display position after the button operation
