Chapter 5
Operation of Function — Web control function
120 - ENGLISH
1 [WIRELESS LAN]
Selects [Enable] when you want to enable the wireless LAN
function.
2 [SSID]
Sets the SSID for use.
3 [CHANNEL]
Selects the channel for use.
4 [ENCRYPTION]
Selects [WPA2-PSK(AES)] when performing encrypted
communications.
5 [KEY]
Sets the key to be used when performing encrypted
communications.
8 to 15 alphanumerics can be input.
6 [Back], [Change]
Click the [Back] button to return to the original screen. The setting
change screen is displayed by pressing the [Change] button.
Click the [Submit] button to update the settings.
Note
f
Changing LAN settings while connected to the LAN may cause the connection to cut out.
f
The setting values of the [Network config] page will return to the factory default when the [INITIALIZE] of the [NETWORK] menu is executed
(
x
page 104) .
f
The [ENCRYPTION] is set to [DISABLE] in the factory default setting. If you want to communicate with wireless LAN, it is recommended that
the [ENCRYPTION] is set to [WPA2-PSK (AES)] for security.
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]
→
[Ping test].
1
2
3
4
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit]
Executes the connection test.
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
1
2
3
4
5
6
