Panasonic PT-FW530 Operating Instructions Manual Download

Page: 131 / 156

Chapter 6

Maintenance — Lamp/temperature/filter indicators

ENGLISH - 131

Temperature indicator <TEMP>

Indicator status

Lighting in red

Blinking in red

(2 times)

Blinking in red

(3 times)

Status

Internal temperature is high (warning). Internal temperature is high (standby

status).

The cooling fan has stopped.

Cause

Is the air intake/exhaust port blocked?

Is the room temperature high?

Is the filter indicator <FILTER> lit?

―

Solution

Remove any objects that are blocking the air intake/exhaust port.

Install the projector in a location with the operating environment temperature

between 0 °C (32 °F) and 40 °C (104 °F)

Do not install the projector at high altitudes of 2 700 m (8 858') or higher

above sea level.

Clean or replace the air filter unit. (

page 132)

Turn the <MAIN POWER> switch to

<OFF> (

page 46), and consult

your dealer.

*1 When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment

temperature should be between 0 °C (32 °F) and 35 °C (95 °F).

Note

If the temperature indicator <TEMP> is still lit or blinking after taking the preceding measures, ask your dealer for repair.

If the [PROJECTOR SETUP] menu → [LAMP POWER] is set to [NORMAL], [LAMP POWER] changes to [ECO] forcibly to protect the

projector when the operating environment temperature becomes 35 °C (95 °F) or higher (30 °C (86 °F) or higher when using the projector at

high altitudes).

Filter indicator <FILTER>

Indicator status

Lighting in red

Blinking in red

Status

The filter is clogged.

The temperature inside or outside the projector is abnormally high.

The air filter unit is not attached.

Cause

Is the air filter unit dirty?

Is the air intake/exhaust port

blocked?

Is the air filter unit attached?

Solution

Clean or replace the air filter unit.

(

page 132)

Remove any objects that are

blocking the air intake/exhaust port.

Attach the air filter unit.

Note

If the filter indicator <FILTER> is still lit or blinking after taking the preceding measures, ask your dealer for repair.

If the air filter case is not attached when the projector is switched on, the filter indicator <FILTER> blinks in red.

Summary of Contents for PT-FW530





























































































































































Search results

Summary of Contents for PT-FW530

Reviews:

Related manuals for PT-FW530

Brands by name

Popular brands

Panasonic PT-FW530, Operating Instructions Manual

Search results

Summary of Contents for PT-FW530

Reviews:

Related manuals for PT-FW530

Brands by name

Popular brands