Panasonic PT-DZ770E Operating Instructions (Functional Manual) Download Page 89

Page: 89 / 124

[NETWORK] menu

ENGLISH - 89

Settings

▶

■

[Network status] page

Click [Status] → [Network status].

The current network setting status is displayed.

▶

■

[Access error log] page

Click [Status] → [Access error log].

The error log on the WEB server is displayed such as access to the pages that do not exist or access with

unauthorized user names or passwords.

▶

■

[Access log] page

Click [Status] → [Access log].

The log such as user name accessed to the WEB control page, accessed IP address, accessed time is

displayed.

Note

[Access error log]/[Access log] will display the recent few thousand accesses/requests. May be unable to

display all information when many accesses/requests are made at one time.

When [Access error log]/[Access log] exceeds a certain amount, old information will be erased.

Confirm [Access error log]/[Access log] periodically.

Summary of Contents for PT-DZ770E





























































































































Search results

Summary of Contents for PT-DZ770E

Reviews:

Related manuals for PT-DZ770E

Brands by name

Popular brands

Panasonic PT-DZ770E, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-DZ770E

Reviews:

Related manuals for PT-DZ770E

Brands by name

Popular brands