[PROJECTOR SETUP] menu
ENGLISH - 73
Settings
[NO SIGNAL SHUT-OFF]
You can set the power of the projector automatically
to standby if there is no input signal by the specified
time.
1) Press
▲▼
to select [NO SIGNAL
SHUT-OFF].
2) Press
◀▶
to switch [NO SIGNAL
SHUT-OFF].
[DISABLE]
Disables the No signal shut-off
function.
[10MIN.] -
[90MIN.]
Allows you to set in ten minutes
intervals.
[FUNCTION BUTTON]
Set the functions of the <FUNCTION> button on the
remote control.
1) Press
▲▼
to select [FUNCTION
BUTTON].
2) Press the <ENTER> button.
▶
z
The
[FUNCTION BUTTON]
screen is displayed.
3) Press
▲▼
to select a function.
[DISABLE]
Disables the <FUNCTION> button.
[SUB MEMORY]
Switches the sub memory.
(
page 78)
[SYSTEM
SELECTOR]
Switches the [SYSTEM
SELECTOR] setting.(
page 50)
[SYSTEM
DAYLIGHT
VIEW]
Switches the [SYSTEM DAYLIGHT
VIEW] setting.(
page 49)
[FREEZE]
Temporarily freezes video to be a
still image.(
page 64)
[SIDE BY SIDE]
Switches to two window display.
(
page 64)
4) Press the <ENTER> button.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock
of the projector.
1) Press
▲▼
to select [DATE AND TIME].
2) Press the <ENTER> button.
▶
z
The
[DATE AND TIME]
screen is displayed.
3) Press
▲▼
to select an item.
▶
■
To set time zone
4) Select [TIME ZONE] in Step 3).
5) Press
◀▶
to set [TIME ZONE].
▶
■
To adjust the date and time
manually
4) Select [ADJUST CLOCK] in Step 3).
5) Press the <ENTER> button.
▶
z
The
[ADJUST CLOCK]
screen is displayed.
6) Press
▲▼
to select an item, and press
◀▶
to set the local date and time.
7) Press
▲▼
to select [APPLY], and
press the <ENTER> button.
▶
z
The setting of the time will be completed.
▶
■
To adjust the date and time
automatically
4) Select [ADJUST CLOCK] in Step 3).
5) Press the <ENTER> button.
▶
z
The
[ADJUST CLOCK]
screen is displayed.
6) Press
▲▼
to select [NTP
SYNCHRONIZATION], and press
◀▶
to change the setting to [ON].
▶
z
The setting will change as follows each time
you press the button.
[OFF]
[ON]
7) Press
▲▼
to select [APPLY], and
press the <ENTER> button.
▶
z
The setting of the time will be completed.
Note
z
To set the date and time automatically, the projector
must be connected to the network.
z
If synchronization with the NTP server fails
just after [NTP SYNCHRONIZATION] is turned
[ON], or if [NTP SYNCHRONIZATION] is turned
[ON] while the NTP server is not set, [NTP
SYNCHRONIZATION] will return to [OFF].
z
Access the projector via a web browser to set
the NTP server. Refer to “[Adjust clock] page”
(
page 92) for details.
