![background image](http://html1.mh-extra.com/html/panasonic/kx-vc300/kx-vc300_operating-instructions-manual_3638168112.webp)
–
"Local site name"
–
"IP Address"
(when
"Manual"
is
selected for
"IP Address"
)
–
"Subnet mask"
(when
"Manual"
is
selected for
"IP Address"
)
•
If you are currently entering
"Local site
name"
, the next screen will not be
displayed even if you press
[R]
.
•
In IP mode, you cannot configure the
"Encryption Key"
setting. This setting is
available only in NAT Traversal mode.
For details, refer to the following web site:
http://panasonic.net/psn/products/
hdvc/nat_traversal/index.html
"Connection mode"
: Use
[
][
]
to select a
connection mode (
IP Mode
or
NAT Traversal
Mode
).
Note
•
If a connection mode is selected without
completing network settings, the settings
cannot be saved. Before making local site
settings, change the connection mode
(Page 105) and make network settings
(Page 89).
"Local site name"
: Enter a name for the local site.
"Max. Bandwidth"
: Press
[Enter]
and use
[
]
[
]
to select the maximum allowed bandwidth to
be used (
512 kbps
,
768 kbps
,
1.0 Mbps
,
1.2 Mbps
,
1.5 Mbps
,
2.0 Mbps
,
2.5 Mbps
,
3.0 Mbps
,
3.5 Mbps
,
4.0 Mbps
,
4.5 Mbps
,
5.0 Mbps
,
5.5 Mbps
,
6.0 Mbps
,
6.5 Mbps
,
7.0 Mbps
,
7.5 Mbps
,
8.0 Mbps
,
8.5 Mbps
,
9.0 Mbps
[default],
10.0 Mbps
).
Note
•
The maximum bandwidth during a video
conference call adjusts to that of the party
that has set the lowest bandwidth for the
maximum bandwidth setting among all
participating parties.
•
You cannot select a value that is higher than
the maximum bandwidth set by the dealer.
For details, contact your dealer.
•
When you make a 3-party video conference
call, select a value of
"1.0 Mbps"
or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
•
When you make a 4-party video conference
call, select a value of
"1.5 Mbps"
or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
"Encryption"
: Use
[
][
]
to select whether to
enable encryption.
–
"ON"
: Encryption is enabled.
–
"OFF"
(default): Encryption is disabled.
Note
•
Be careful when changing encryption
settings because doing so may cause you
to become unable to communicate with
other parties.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on
networks that are not secured against such
actions.
•
If you cannot specify a value for
"Encryption"
because the setting is
unavailable, contact your network
administrator.
•
When connecting to an MCU or
non-Panasonic video conference system,
set
"Encryption"
to
"OFF"
because
encryption is not available. Encryption must
be disabled on both sides.
"Video Quality"
: Use
[
][
]
to select between
prioritizing smooth movement or image quality for
video.
–
"Motion"
(default): Prioritize smooth
movement.
–
"Sharpness"
: Prioritize image quality.
Note
•
If you are using the KX-VC300,
"Sharpness"
can only be selected after
purchasing an activation key card
(KX-VCS401) to enable sending images in
Full HD resolution (Page 107).
•
If one of the other parties is using an older
software version,
"Motion"
will be selected.
•
If
"Max Resolution"
is set to
"HD"
, and
"Video Quality"
is changed from
"Motion"
to
"Sharpness"
, the setting for
"Max Resolution"
is automatically
changed to
"Auto"
.
"Max Resolution"
: Use
[
][
]
to select the
maximum display resolution of the main video
camera and sub video camera used during a video
conference call.
–
"Full HD"
: Maximum resolution: 1920
´
1080
(This mode switches the display resolution
according to the condition of the network.)
–
"HD"
(default [for KX-VC300]): Maximum
resolution: 1280
´
720
112
Operating Manual
Document Version 2012-03
Contacts and Settings