2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Press
[
]
twice.
•
The third page is displayed.
4.
Use
[
][
]
to select
"Network Test"
and press
[Enter]
.
•
The network test screen is displayed.
5.
Enter an IP address.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
6.
Press
[R]
.
•
The network test starts. After the network test is
finished, if the network test was successful or
timed out, the details of the results are
displayed. If the network test failed, a message
indicating the failure is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Performing Self Diagnosis
You can check how your image will be displayed and
how your voice will be heard to the other party before
starting a video conference call, using your own display
and speakers.
Note
•
Self diagnosis can be performed even when a
headset is connected.
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Press
[
]
twice.
•
The third page is displayed.
4.
Use
[
][
]
to select
"Self Diag."
and press
[Enter]
.
•
The self diagnosis screen is displayed with the
dialog box.
Note
•
You can hide or display the dialog box by
pressing
[B]
.
•
Set the microphone at least 1 m (3.3 ft)
away from the speakers.
5.
Press
[R]
.
•
The self diagnosis starts.
Note
•
Check the image that is displayed from the
main video camera.
•
To avoid feedback, slowly raise the volume
using the remote control’s
[+]
button.
100
Operating Manual
Document Version 2012-03
Contacts and Settings
