6
Enter the IP address, SIP URI (or SIP user name), or
MCU’s conference room number@IP address.
Note
•
If the IP address contains 1 or 2 digit numbers,
enter these numbers as they are. Do not enter
like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
To initiate a video conference call by entering a
SIP URI (SIP user name@SIP domain name),
you must set
"SIP Server"
to
"ON"
and specify
"SIP Server Address"
,
"SIP Username"
, and
"SIP Domain Name"
. Also, specify
"Digest
Authentication"
,
"Authentication ID"
, and
"Authentication Password"
as necessary
(Page 105). For details, contact your network
administrator.
•
When making a video conference call within your
own SIP domain, you can make the call by
entering the other party’s SIP user name. When
the other party is not within your SIP domain, you
must also include their SIP domain name in
addition to their SIP user name.
When a SIP domain name is not specified, your
own SIP domain name is automatically
appended to the address and the call is made.
Be careful as this may result in calling the wrong
party.
•
The characters that can be input for SIP URI
entry are as follows:
SIP user name: alphanumeric characters,
symbols
. = * + _ - $ ! ? / ' ( )
(up to 60
characters)
SIP domain name: alphanumeric characters,
symbols
. -
(up to 128 characters)
Enter an RFC-compliant value. For details,
contact your network administrator.
•
To initiate a video conference call by entering an
MCU’s conference room number@IP address,
"SIP Server"
must be set to
"OFF"
•
The characters that can be input for an MCU’s
conference room number are as follows:
Alphanumeric characters, symbols
. = * + _ - $
! ? / ' ( )
(up to 60 characters)
42
Operating Manual
Document Version 2012-03
Starting a Video Conference
