2.6 Help
76
PC Programming Manual
Setting Features
A
•
The following setting data is not saved to the SD memory card, so will be deleted when
the PBX is initialized. This data is stored in the PBX's battery backup memory.
•
Incoming Call Log
•
Outgoing Call Log (including Last Number Redial)
•
Message Waiting
•
SMDR
•
ICD Group monitor log for supervisor
•
PBX date and time
•
Timed Reminder
•
LPR Timed Update time
•
Daily test start time
•
PT handset/headset volume
•
PT SP-PHONE volume
•
PT ring volume
•
PT display contrast
•
ICD Group login status
(All extensions are set to Login by default.)
•
ICD Group Ready/Not Ready status
(All extensions are set to Ready by default.)
•
Live Call Screening (LCS) On/Off
•
Hands-free Answerback status
•
Absent Message status of extensions
(Absent Message data itself is not cleared.)
•
FWD/DND status
(FWD destinations are not cleared.)
•
Extension Dial Lock/Remote Extension Dial Lock
•
Extension PIN Lock/Extension PIN Lock counter
•
Verification Code PIN Lock/Verification Code PIN Lock counter
•
Password Lock counter for Remote System Programming
•
PBX Error Log
•
Digital Trunk Error Report data
In addition, the following data cannot be restored:
•
SVM Log and messages (both greeting messages and voice messages left by
callers) recorded in an SVM card (KX-TDA50 only)
Q
How do I change the dialing mode of an analog CO line?
A
•
From the
2.7.11 [1-1] Slot—LCO Port
screen, change the
Dialing Mode
setting of the
target port to "DTMF" or "Pulse", as required.
Q
How do I set disconnect detection (CPC Detection) for an analog CO line?
A
•
From the
2.7.11 [1-1] Slot—LCO Port
screen, modify the
CPC Signal Detection
Time—Outgoing, Incoming
setting of the target port.
The required value varies by carrier. Transmission and reception can be set separately.
