2.7 [1] Configuration
160
PC Programming Manual
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS,
E911
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of
Port Type
on this screen.
When using the Centralized VM feature, set CF (Rerouting) to "No".
Default
CLIR, E911: Yes
Other services: No
Value Range
No, Yes
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
1.13.20 Private Network Features—QSIG—CF (Call Forwarding)
1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification
Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
1.13.22 Private Network Features—QSIG—CT (Call Transfer)
1.13.19 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
