2.7 [1] Configuration
196
PC Programming Manual
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
Extension Number
Specifies the extension number of the port.
To change the extension number of an extension, follow the steps below:
1.
Type the new extension number, then click
Apply
.
2.
Set the status of the extension port to "
OUS
", then "
INS
".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
For KX-TDA100/KX-TDA200:
Starting at 101
For KX-TDA600:
Starting at 1001
(For port 01 of the first extension card that is installed. Extension numbers are preset for subsequent
extensions by adding one to the previous extension number.)
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.7.24 [1-1] Slot—IP-Extension Port
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click
Command
.
This cell is only active when
Status
on this screen shows
Registered
.
Default
Current status
